HUMMINGBIRD DEPTH FINDER MANUAL

It may be possible to check for this by adding enough water inside the boat hull to partially cover the transducer. If the transducer was installed to 'shoot through' the boat hull, the installation may have degraded allowing air bubbles to be trapped between the transducer and boat hull.Physical damage of cables is not covered by our warranty. If mending the cable does not solve the problem, you will need to purchase a new transducer. If you find damage, you can try to mend the cable. Check for any damage to the transducer or cable.If it has, simply reset the transducer by snapping it back in its bracket. Make sure the transducer has not 'kicked up'. If the depth sounder reads correctly at slow speeds but not at high speeds, the problem is usually with the installation. Check for proper transducer installation, according to the Operations Manual.The correct transducers to be used with your depth sounder are listed in your Operations Manual. Normally, the transducer type is marked on the cable within the first 6 inches from the connector end.

HUMMINGBIRD DEPTH FINDER MANUAL

Lower Range - If your depth sounder has the Lower Range menu, be sure that this is set on Auto.Ĭheck the Operations Manual and transducer cable for the proper transducer.Check your Operations Manual for this feature and its use. Be sure that this is set correctly for the transducer that you are using. Transducer Feature - Some depth sounders also have a Transducer Feature in the Options menus.Max Depth - If your depth sounder has the Max Depth menu, be sure that it is set to Auto.Be sure that it is set to 'down' if you are using the dual beam or multiple beam transducers or set to 'side' if you are using the wide side transducer. Sonar Mode - Some depth sounders have a Sonar Mode feature under the System Options menu.

Sonar - Some depth sounders also have a Sonar menu that allows for the sonar to be turned Off.

Be sure this has not been set so that the depth readout would indicate a depth of zero feet deep or a negative depth readout due to the current depth of the water.

Depth Offset or Keel Offset - Some models of depth sounders have a Depth Offset or Keel Offset feature.

Features and Menus - For those depth sounders with the following features and menus, try adjusting them as stated:.

Maximum Depth - Check that you are not trying to read beyond your depth sounders maximum depth capabilities.

Sonar does not read through air and testing your product while your boat is trailered WILL NOT give you correct information. All testing related to the transducer and depth performance must be performed with the boat in the water.

No Depth - Consult the Common Checks Guide and make sure that all categories are fully verified.

Just be sure to include a detailed description of the problem along with the images to help us assist you quicker. If you do not have a Combo product with a card reader, a snapshot from your cell phone or digital camera can be emailed to us just as easily. Those images can be exported from the card and the necessary files can be emailed to us for examination.

Recording View - Again with an optional purchase SD memory card, you can make sonar recordings from your unit.

They always say a picture speaks a thousand words and in this case, it certainly can help us more quickly identify issues. Once you initiate that snapshot, you can then export the image from the SD card and email the image to Humminbird Customer Service.

Snapshot View - With an optional purchase SD memory card installed, you can activate the Screen Snapshot feature from the Accessories Menu Tab.

If you have a Humminbird combo product that has a card reader and you have a memory card, you have two options available: The other tools, if you have one of our combo products, is the Humminbird unit itself, and an SD Memory card. The handiest of those tools is a camera or cell phone. Today, with all of the technology available to us, we have some very valuable tools for identifying depth and sonar related issues. Testing your transducer while out of the water can damage the transducer, the unit or both. This article will help guide through many common causes of incorrect depth or no depth displayed on your Humminbird, and correct the issue.Ĭhecking for depth while your boat is parked in your driveway or yard, or testing the transducer in a swimming pool, bucket or barrel of water is not an accurate test for sonar.Īll tests should be conducted in a lake, pond, river or sea. I am having problems with my depth reading.

Hummingbird depth finder